WHAT IS REVERSE OSMOSIS?

Reverse osmosis (ROI) is a special type of filtration that uses a thin semi-permeable membrane to transfer pure water with a knife, while larger molecules such as soluble salts (ions) also expel isolated viruses. . Osmosis is used to produce high purity water for drinking water, steam, industrial, food and beverage, cosmetics, pharmaceuticals, marine hygiene and many other purposes. This is a technology that has been recognized for over a century and has been commercially available since the 1960s.

The RO Plant System is built around one of its membranes. Each membrane is a semi-helical material. The film is 4 and 8 inches in size and has a diameter of 2 to 4, 8 and 8 inches. The industry has adopted a 40-inch standard for converting films from various manufacturers into device systems. The main measurement of the film is a square screen. The film is available in 350-450 square feet.

Semi-permeable membranes were initially developed using cellulose acetate (CA), but later the industry focused exclusively on the use of thin-film mixtures (TFCs) on solid substrates. TFC films are mainly used nowadays.

Reverse osmosis, known as RO, is a process in which water is absorbed or water is absorbed by pressure under pressure through a reverse osmosis membrane.

Unfortunately,

To understand the purpose and steps of osmosis recovery, I must first understand the mechanism behind osmosis.

Osmosis is an element in nature and one of the most important processes in the universe. This is the event when the saline solution decides to switch to saline. An example of osmosis is when the roots of herbs collect water from the soil and my kidneys draw water from our blood.

The following is a diagram showing the mechanism of osmosis. Solutions based on solids will have a natural tendency to find the solutions that have the most direct impact. For example, if you have a tank full of low-salt water and another tank full of salt water, and separated by a semipermeable membrane, then water with a low salt concentration begins to move. Return to the installed tank.

HOW DOES REVERSE OSMOSIS WORK?

Reverse osmosis is a continuous treatment method in which pressure is used to retain spring water through thin films and thus waste is separated from the water.


Reverse Osmosis Plant works by changing the principle of osmosis, which is the natural tendency of dissolved salts to flow across the membrane at the lowest salt concentration. This process is found throughout nature. Plants use this to absorb water and nutrients from the soil. Kidney osmosis is used to absorb water from human blood and other animals.


In rheumatoid arthritis systems, pressure (usually created from the pump) is used to overcome the natural osmotic pressure, which pushes the water supplied through dissolved salts and other contaminants through a semi-permeable complex membrane which removes a large percentage. Of garbage. The product of this process is extremely pure water.


Rejected salts and contaminants focus the membrane and allow water to flow or perform other operations. In the general industrial industry, 75% of the feed is purified. By saving water, 85% of the feed is purified.


The reverse osmosis system uses cross filtration, as the solution passes through a filter with two outlets: filtered water on one side and polluted water on the other side. To prevent contamination build-up, filtering through the flow of water allows the elimination of build-up of pollution and disruption required to keep the surface of the film clean.